bitcoin-sdk-js

import * as bitcoin from 'bitcoin-sdk-js';

// initialize Bitcoin Transaction object
const tx = new bitcoin.Transaction();

// add UTXO to spend as input
await tx.addInput({
  txHash: txId, // transaction id of utxo
  index: 0, // index of utxo in transaction
  value: value, // value of utxo(unit is satoshi)
} as bitcoin.UTXO);

// add Target output to send Bitcoin
// most common transaction which sends bitcoin to single sig address
await tx.addOutput({
    address: await bitcoin.address.generateAddress(pubkey),
    value: value - fee, // value of utxo - fee
} as bitcoin.Target);

// sends bitcoin to 2-of-3 multisig transaction
await tx.addOutput({
    // all the smart contract output is recommended to use script address!
    address: await bitcoin.address.generateScriptAddress(
        // this generate multisig smart contract, which is possible up to 15-of-15 
        await bitcoin.script.generateMultiSigScript(2, [pubkey1, pubkey2, pubkey3]),
    ),
    value: value - fee, // value of utxo - fee
} as bitcoin.Target);

// sends bitcoin to single(or multi) sig script with timelock
await tx.addOutput({
    address: await bitcoin.address.generateScriptAddress(
        // able to spend this output after given block height
        (await bitcoin.script.generateTimeLockScript(2542622)) +
        // you can use generateMultiSigScript instead of single sig here
        (await bitcoin.script.generateSingleSigScript(pubkey)),
    ),
    value: value - fee, // value of utxo - fee
} as bitcoin.Target);

// sends bitcoin to single(or multi) sig script with hashlock
await tx.addOutput({
    address: await bitcoin.address.generateScriptAddress(
        // able to spend this output if 'secret' is given
        (await bitcoin.script.generateHashLockScript('secret')) + 
        // you can use generateMultiSigScript instead of single sig here
        (await bitcoin.script.generateSingleSigScript(pubkey)),
    ),
    value: value - fee, // value of utxo - fee
} as bitcoin.Target);

// sends bitcoin to single(or multi) sig script with timelock + hashlock
await tx.addOutput({
    address: await bitcoin.address.generateScriptAddress(
        /* 
        WATCH OUT! Order matters. You must place script in the order of
        timelock, hashlock and single(or multi) sig
        to spend this output with bitcoin-sdk-js
        */
        (await bitcoin.script.generateTimeLockScript(2542622)) +
        (await bitcoin.script.generateHashLockScript('secret')) +
        // you can use generateMultiSigScript instead of single sig here
        (await bitcoin.script.generateSingleSigScript(pubkey)),
    ),
    value: value - fee, // value of utxo - fee
} as bitcoin.Target);

// sends bitcoin to script with timelock + hashlock (no sig required)
await tx.addOutput({
    address: await bitcoin.address.generateScriptAddress(
        // if you only want hashlock, you can remove generateTimeLockScript
        (await bitcoin.script.generateTimeLockScript(2542622)) +
        (await bitcoin.script.generateHashLockScript('secret')),   
    ),
    value: value - fee, // value of utxo - fee
} as bitcoin.Target);

// if transaction use timelock input, must set tx locktime bigger than input timelock
tx.setLocktime(2542622);

// if input utxo only requires single sig(p2wpkh or p2pkh)
await tx.signInput(privkey, 0);

// or if input utxo only requires multi sig(p2wsh or p2sh)
await tx.multiSignInput(
    [pubkey1, pubkey2, pubkey3],
    [privkey1, privkey2],
    0, // input index to sign
);

// or if input utxo requires single sig with smart contract(p2wsh or p2sh)
await tx.signInput(
    privkey,
    0, // input index to sign
    // below are optional, use to sign legacy utxo or unlock smart contract utxo
    'segwit', // default is segwit, you might use legacy if necessary
    await bitcoin.script.generateTimeLockScript(2542622), // is timelock input? provide script
    'secret', // is hashlock input? provide secret to unlock
);


// or if input utxo requires multi sig with smart contract(p2wsh or p2sh)
await tx.multiSignInput(
    [pubkey1, pubkey2, pubkey3],
    [privkey1, privkey2],
    0, // input index to sign
    // below are optional, use to sign legacy utxo or unlock smart contract utxo
    'segwit', // default is segwit, you might use legacy if necessary
    await bitcoin.script.generateTimeLockScript(2542622), // is timelock input? provide script
    'secret', // is hashlock input? provide secret to unlock
);

// or if input utxo requires unlock hash with smart contract(p2wsh or p2sh)
await tx.unlockHashInput(
    'secret',
    0,
    // below are optional, use to unlock legacy utxo or timlock utxo with hashlock
    'segwit', // default is segwit, you might use legacy if necessary
    await bitcoin.script.generateTimeLockScript(2542622),// is timelock input? provide script
);

// You can broadcast signed tx here: https://blockstream.info/testnet/tx/push
const txToBroadcast: string = await tx.getSignedHex();

import * as bitcoin from 'bitcoin-sdk-js';

// You can send and spend any smart contract. Below example is classic HTLC
const HTLC = bitcoin.Opcode.OP_IF +
        (await bitcoin.script.generateTimeLockScript(2576085)) +
        (await bitcoin.data.pushData(pubkey1)) + // must specify data to read(if not opcode)
        pubkey1 +
        bitcoin.Opcode.OP_ELSE +
        (await bitcoin.script.generateHashLockScript('abcdef')) +
        (await bitcoin.data.pushData(pubkey2)) + // must specify data to read(if not opcode)
        pubkey2 +
        bitcoin.Opcode.OP_ENDIF +
        bitcoin.Opcode.OP_CHECKSIG
// p2wsh address, custom contract address must be p2wsh(p2sh) (or taproot address, check next chapter!)
const toAddress = await bitcoin.address.generateScriptAddress(HTLC);

// Then, can be spent as an input by signing by scriptSig!
await tx.setLocktime(2576085); // if transaction use timelock input, must set tx locktime bigger than input timelock
// spend by executing OP_IF branch
await tx.signInputByScriptSig(
    // script sig list(order matters!!! bitcoin script is stack-based LIFO)
    [
      await bitcoin.crypto.sign(
        // method to get input message hash to sign
        await tx.getInputHashToSign(
          HTLC, // redeem script as p2wsh
          0, // input index
        ),
        privkey1, // signer private key
      ),
      '01', // execute OP_IF
      HTLC, // redeem script as p2wsh
    ],
    0, // input index
  );
// Or spend by executing OP_ELSE branch
await tx.signInputByScriptSig(
    // script sig list(order matters!!! bitcoin script is stack-based LIFO)
    [
      await bitcoin.crypto.sign(
        // method to get input message hash to sign
        await tx.getInputHashToSign(
          HTLC, // redeem script as p2wsh
          0, // input index
        ),
        privkey2, // signer private key
      ),
      'abcdef', // unlock hash
      '', // execute OP_ELSE
      HTLC, // redeem script as p2sh
    ],
    0, // input index
  );

// You can broadcast signed tx here: https://blockstream.info/testnet/tx/push
const txToBroadcast: string = await tx.getSignedHex();

import * as bitcoin from 'bitcoin-sdk-js';

// Let's send and spend above HTLC in taproot and tapscript way!
/*
  Schnorr key is same with any bitcoin key pair, except it does not use public key prefix byte '02' or '03'.
  This key pair will be used as a master key to spend UTXO in taproot, after tweaked(will explain how to step by step).
*/
const schnorrPubkey = (await bitcoin.wallet.generateKeyPair()).publicKey.slice(2); // remove first byte (which is parity bit)
const schnorrPrivkey = (await bitcoin.wallet.generateKeyPair()).privateKey;

/*
  HTLC consists of conditional branch, in which OP_IF contains Time Lock Contract and OP_ELSE contains Hash Lock.
  We can construct tapscript tree where each leaf has its own contract(script), enable unlimited spending branches.
*/
// Originally OP_IF branch Time Lock Contract
const timeLockContract =
    (await bitcoin.script.generateTimeLockScript(2576085)) +
    (await bitcoin.data.pushData(schnorrPubkey1) + // must specify data to read(if not opcode)
    schnorrPubkey1 + // you must use schnorr key even in tapscript
    bitcoin.Opcode.OP_CHECKSIG;
// Originally OP_ELSE branch Hash Lock Contract
const hashLockContract =
    (await bitcoin.script.generateHashLockScript('abcdef')) +
    (await bitcoin.data.pushData(schnorrPubkey2) + // must specify data to read(if not opcode)
    schnorrPubkey2 + // you must use schnorr key even in tapscript
    bitcoin.Opcode.OP_CHECKSIG;

/*
  You can get tapbranch from a pair of script, and repeat over to reach to the root of tree(which is 'taproot') 
  Here we have only a single pair of script, so tapbranch of it is taproot
*/
const taproot = await bitcoin.tapscript.getTapBranch([
    await bitcoin.tapscript.getTapLeaf(timeLockContract),
    await bitcoin.tapscript.getTapLeaf(hashLockContract),
]);
// Then, get taptweak with schnorr key generated above
const tapTweak = await bitcoin.tapscript.getTapTweak(
    schnorrPubkey,
    taproot,
);
// Finally, you can tweak schnorr public key, which can be used as taproot key!
const tapTweakedPubkey = await bitcoin.tapscript.getTapTweakedPubkey(
    schnorrPubkey,
    tapTweak,
);
// generate taproot address with taproot key(and send to it!)
const toAddress = await bitcoin.address.generateAddress(tapTweakedPubkey.tweakedPubKey, 'taproot');



// Then, can be spent as an input!
// one thing to keep in mind, taproot or tapscript spend needs to provide all the script public key of input
await tx.addInput({
    txHash: txId,
    index: 0,
    value: value,
    script: await bitcoin.script.getScriptByAddress(toAddress),
});

await tx.setLocktime(2576085); // if transaction use timelock input, must set tx locktime bigger than input timelock

// taproot spend? just sign input with tweaked schnorr key(which is, taproot private key)
await tx.signInput(
    await bitcoin.tapscript.getTapTweakedPrivkey(schnorrPrivkey, tapTweak), // provide tweaked private key
    0,
    'taproot',
);

// Or tapscript spend? Let's spend by hash lock script!
const sigStack = [
    await bitcoin.crypto.sign(
      await tx.getInputHashToSign(hashLockContract, 0, 'tapscript'),
      schnorrPrivkey2,
      'schnorr',
    ), // schnorr signature
    'abcdef', // hash to unlock
    hashLockContract, // spend script
    // you must specify path to find taproot with provided script(For more detail, check BIP341!)
    await bitcoin.tapscript.getTapControlBlock(
      schnorrPubkey,
      tapTweakedPubkey.parityBit,
      await bitcoin.tapscript.getTapLeaf(timeLockContract), // path to find taproot
    ),
];

await tx.signInputByScriptSig(sigStack, 0, 'tapscript');

// You can broadcast signed tx here: https://blockstream.info/testnet/tx/push
const txToBroadcast: string = await tx.getSignedHex();